How to choose a microfiber car wash towel?

The following is an introduction to the performance characteristics of microfiber car wash towels. When you know these, you will know how to choose them.

1. High water absorption: The ultrafine fiber adopts orange petal technology to divide the filament into eight petals, which increases the surface area of ​​the fiber, increases the pores in the fabric, and enhances the water absorption effect by means of the capillary wicking effect. Quick water absorption and quick drying become its notable characteristics.

2. Strong detergency: the fineness of microfibers with a diameter of 0.4 μm is only 1/10 of real silk, and its special cross-section can more effectively capture dust particles as small as a few microns, and the effect of decontamination and oil removal is very obvious.

3. No hair removal: high-strength synthetic fiber filaments are not easy to break, and at the same time, the fine weaving method is used to prevent spinning and looping, and the fibers are not easy to fall off from the surface of the towel. Use it to make cleaning towels and car towels, especially suitable for wiping bright paint surfaces, electroplated surfaces, glass, instruments and LCD screens, etc. Cleaning the glass during the car filming process can achieve a very ideal filming effect.

4. Long life: Due to the high strength and toughness of superfine fibers, its service life is more than 4 times that of ordinary towels, and it remains unchanged after repeated washing. At the same time, polymer fibers will not be like cotton fibers. Produce protein hydrolysis, even if it is not dried after use, it will not become moldy or rot, and has a long lifespan.

5. Easy to clean: when ordinary towels are used, especially natural fiber towels, the dust, grease, dirt, etc. on the surface of the object to be wiped are directly absorbed into the fiber, and remain in the fiber after use, which is not easy to remove and takes a long time It will even harden and lose its elasticity after use, which will affect its use. Microfiber towels absorb dirt between the fibers (rather than inside the fibers). In addition, the fibers have high fineness and high density, so they have strong adsorption capacity. After use, they only need to be cleaned with water or a little detergent.

6. No color fading: the dyeing process uses TF-215 and other dyes for ultra-fine fiber materials. The advantage of not fading makes it completely free from the trouble of decolorization and pollution when cleaning the surface of objects.